Hello, welcome to visit the official website of Liaoning Qianfeng Steel Plastic Pipe Manufacturing Co., Ltd.!
Liaoning Qianfeng Steel Plastic Pipe Manufacturing Co., Ltd.
Address: Dawa Lingang Economic Zone, Panjin City
Website: www.shanghaiyuanbi.com
Sales of a company
General Manager: Zhao Lei 18241448558
Sales Minister: Liu Wenli 18841483313
Sales Second Company
General Manager: Zhao Shuxiu 13188225517
Sales Minister: Pei Xiaojun 13804148185
Sales three companies and foreign trade
General Manager: Dai Gang 13604976693
Sales Minister: Chen Liming 18524274505
Sales four companies
General Manager: Chen Tieyan 18341472200
Sales Director: Meng Lin 19904144892
How to use the steel-plastic composite pipe correctly should be used correctly in accordance with the specifications. Fire-fighting steel-plastic composite pipe Steel-plastic composite pipe is a new type of pipe, which is used in many fields and has many excellent properties, especially its anti-corrosion performance is loved by people. Steel-plastic composite pipes are used in many places. The method of use is very particular.
When connecting steel-plastic composite pipes, some tools are needed, such as hacksaws and wire stranding machines. These tools are often used in pipeline construction. The connection of steel-plastic composite pipes also cannot do without these tools. The connection method is basically the same as the traditional connection method. You can refer to the connection method of galvanized pipe.
The connection method of the steel-plastic composite pipe needs to be noted that the raw material tape needs to be used for the connection between the pipe and the pipe fittings. The main purpose of this is to protect the pipe of the steel-plastic composite pipe and prevent the joint from being corroded; When cutting the steel-plastic composite pipe, do not use high-temperature cutting methods to cut. Such methods as gas cutting can never be used. Only the cutting method of pipe thread can be used. The cutting method cannot be completely cut. After cutting in half, the fish and shrimp should use a handsaw to cut them, and then use the established tools to remove the burrs from the pipes after the cutting is completed. When bending the pipe, heating cannot be used to bend it, the method used should be cooling, and the bending amplitude should not be too large; the surface of the wire mouth should be cleaned before the interface , And the pipe fittings used must meet the relevant standards; it should not be exposed to the sun during transportation, otherwise it will cause damage to the steel-plastic composite pipe. The storage temperature cannot be too high for the composite pipe. How about the steel-plastic composite pipe? Keep away from heat sources.